Gw Instek LCR-816 Digital-Multimeter, DMM, LCR-816 데이터 시트
제품 코드
LCR-816
PROGRAMMING
107
<value> Test
result
Any 7 digit ASCII including
sp
(+) or –
characters and a decimal point.
Primary measurement
value
value
Example
MAIN:PRIM 32.705<^END>
The
primary
measurement is 32.705 (primary
measurement unit).
PRIMARY OV01
Measurement
Primary OV01 indicates that the primary measurement exceeds the
measurement range of the LCR meter. For example: If the
impedance of the DUT is less than the measurement range.
measurement range of the LCR meter. For example: If the
impedance of the DUT is less than the measurement range.
Return Syntax
PRIM:OV01<^END>
Example PRIM:OV01<^END>
Note, no units are returned
PRIMARY OVER SECONDARY OVER
Measurement
When both the primary and secondary factors exceed the range
(OVER), OVER will be returned.
(OVER), OVER will be returned.
Return Syntax
PRIM:OVER<END>
Example PRIM:OVER<END>
Note, no units are returned
SECONDARY FACTOR & PRIMARY UNIT
Measurement
Returns the secondary measurement results and the primary unit
(R/Q C/D L/Q only). This measurement is the second measurement
displayed after measurements have been started.
(R/Q C/D L/Q only). This measurement is the second measurement
displayed after measurements have been started.
Return Syntax
MAIN:SECO <value><unit1><^END>
<value> Test
Result
Any 6 digit ASCII character including
sp
(+) or
– characters and a decimal point.
Secondary measurement
value
value
LCR-800
User
Manual
108
<unit1> Primary
unit
nF, pF, uF
nanofarads, picofarads,
microfarads
microfarads
k
sp, spsp
(
sp
=
space character)
kΩ, Ω
mH, H
sp
millihenry,
henry
Example
MAIN:SECO .0045nF<^END>
The
secondary
measurement
is .0045 (D) and nF is
the primary measurement unit.
SECONDARY OVER & PRIMARY UNIT
Measurement
Secondary Over indicates that the secondary measurement exceeds
the measurement range of the LCR meter. The unit returned refers to
the primary measurement. Applicable for (R/Q, C/D, L/Q, Z/θ)
equivalent circuits.
the measurement range of the LCR meter. The unit returned refers to
the primary measurement. Applicable for (R/Q, C/D, L/Q, Z/θ)
equivalent circuits.
Return Syntax
SECO:OVER<unit1><^END>
<unit1> Primary
unit
nF, Pf, uF
nanofarads, picofarads,
microfarads
microfarads
k
sp, spsp
(
sp
=
space character)
kΩ, Ω
mH, H
sp
millihenry,
henry
Example
SECO:OVER nF<^END>
The secondary measurement is OVER(exceeds range)
and nF is the primary measurement unit.
and nF is the primary measurement unit.