Testo 882 , 33 Hz thermography camera, -20 to +350 °C, 320 x 240 pix bolometer matrix 0560 0882 사용자 설명서
제품 코드
0560 0882
5 First steps
21
WARNING
Eye damage due to laser beam!
> Do not look into the laser beam.
> Do not point the laser beam at people.
> Do not look into the laser beam.
> Do not point the laser beam at people.
Changing assignment of the quick select buttons
1.
1.
Move
Joystick
left or right to open the
Configure key
function
list for the left or right quick select button.
2.
Move
Joystick
up/down to select the desired function.
Function
Description
Image type
Change display mode: Infrared image, real
image or infrared/real image.
image or infrared/real image.
2
Laser
Switch on laser for homing in on the
measuring surface (hold button down).
measuring surface (hold button down).
3
Light
Switch on/off LEDs for lighting up objects for
the digital camera.
the digital camera.
Palette
Change colour palette for the infrared
image.
image.
Emissivity...
Set emissivity and reflected temperature.
Scale...
Set scale limits.
Adjustment
Perform manual zero point calibration.
3.
Press
[OK]
to activate the selected function.
Navigating in the menu
1.
1.
Press
[OK]
button.
- The
Menu
is opened.
2.
Select navigation/function:
• Move
Joystick
up or down to select the menu item.
2
Real image and infrared lens have a different angle of view due to the spacial
separation. The image areas therefore do not correspond completely (parallax
error).
error).
3
Laser and lens have a different angle of view due to the spacial separation.
The laser sighting and the centre of the image thus do not correspond
completely (parallax error).
completely (parallax error).