Testo ComSoft 3 0554 0830 데이터 시트

43

42

Opening the files last used
The files last used can be opened here. The required file is
opened by clicking on the respective file name. However, if
you have already deleted or moved this file to another
location, you will, of course, not be able to open it and you
will receive a message.

Setting up a new location
You can assign as many locations as required within
archive, which can then be managed and structured in one
of the tree structures familiar from Windows Explorer®. The
location or also the location name is used to assign
measurement data (reading, unit, time) a name relevant to

a specific location or other attributes.

Preparing the measurement
It is recommended to set up a fixed
structure in archive for comprehensive
measurements at many different
locations e.g. when measuring the
climate data of a whole house.
These locations can then be
transmitted to the testo 400 instrument
with additional information such as
required value, channel dimensions
etc., if so required.

The location names are in the display on site. Selection is
possible via “up/down, OK” or barcode pen. Saved data is
then coupled with a location name until it is filed in the PC
archive.

Example of printout: diagram