Keysight Technologies USB data capturing module U2356A Input: 500 kS/s, output: 1 MS/s U2356A OPT 902 + ABD 사용자 설명서
제품 코드
U2356A OPT 902 + ABD
48
U2300A Series DAQ Service Guide
Troubleshooting and Self-Test Procedures
Troubleshooting
This section provides suggestions for solving general problems that
you may encounter with the instrument. It guides you on what to
check in the following situations:
you may encounter with the instrument. It guides you on what to
check in the following situations:
1. Power Indicator LED is not lit
Verify that the ac power cord is connected to the power inlet in
the DAQ device.
the DAQ device.
2. Power Indicator LED is lit but the AO/ AI Indicator LED is not lit
Verify that the USB cable is connected to the PC and the USB
inlet in the DAQ device.
inlet in the DAQ device.
3. Power Indicator LED is lit and AO/ AI Indicator LED is lit
Verify if the SCPI commands are correct with “
SYSTem:ERRor?”
command.
Refer to U2300A Series USB Multifunction Programming Guide for
SCPI error messages.
SCPI error messages.
N O T E
If there are no response from the instrument, contact the nearest Agilent
Service Center to obtain further assistance.
Service Center to obtain further assistance.