Insys WLAN Serial 11-02-01-06-02.004 사용자 설명서
제품 코드
11-02-01-06-02.004
18
Implementation and Configuration INSYS WLAN bridge
The INSYS WLAN bridge supports two possibilities for IP address allocation: “Static” and
“DHCP”.
When the option “Static” (default) is activated, the IP addresses are configured manually.
The configuration is done in the displayed window (IP address, subnetwork mask,
standard gateway).
When the option “DHCP” (adjustable in the field “IP address mode”) is activated, the das
INSYS WLAN bridge attempts to retrieve your IP configuration from a DHCP server at the
start. In this case, a DHCP server must be available in the local network, which will
allocate an IP address to the INSYS WLAN bridge .
The default settings are IP=192.168.100.203, Subnetwork mask=255.255.255.0,
Gateway=192.168.100.1
“DHCP”.
When the option “Static” (default) is activated, the IP addresses are configured manually.
The configuration is done in the displayed window (IP address, subnetwork mask,
standard gateway).
When the option “DHCP” (adjustable in the field “IP address mode”) is activated, the das
INSYS WLAN bridge attempts to retrieve your IP configuration from a DHCP server at the
start. In this case, a DHCP server must be available in the local network, which will
allocate an IP address to the INSYS WLAN bridge .
The default settings are IP=192.168.100.203, Subnetwork mask=255.255.255.0,
Gateway=192.168.100.1
5.4.6 Bridge Table
This page displays all devices which are connected “behind” the INSYS WLAN bridge (IP
address and MAC).
The bridging functionality “Layer 2.5 NAT” is described in Chap. 5.4.8.
version 1.01 / 10.04