Tyan S5393G2NR 사용자 설명서

 

http://www.tyan.com 

After you have installed the processor, the heatsink should be installed to ensure that the 
processor runs efficiently and does not overheat. 
 
Follow these instructions to install the heatsink shown. 
 
1.  Align the heatsink with the four holes around the processor socket. 
2.  Press the heatsink down until the four screws are securely seated in the holes. 
3.  Use screw drive to secure the four screws. 

 

 
 
Remember to connect the fan cable to the fan header to complete the installation. 
 
There are many different types of heatsinks that are available for this product.  Each of 
these solutions would have a different method on how to properly install them to the 
motherboard. For the safest method of installation and information on choosing the 
appropriate heatsink, please refer to Intel’s website at http://www.Intel.com. 

 
 
Finishing Installing the Cooling Fan 
After you finish installing the heatsink onto the processor and socket, attach the end wire of 
the fan (which should already be attached to the heatsink) to the motherboard. The 
following diagram illustrates how to connect fans onto the motherboard. 

 
 
After you have finished installing all 
the

 

fans you can connect your drives 

(hard drives, CD-ROM drives, etc) to 
the motherboard.