Samsung LE-37A456 사용자 설명서

1.   Press the TOOLS button. Then press the ENTER  button to 

select "Anynet+(HDMI-CEC)".

.   Press the ▲ or ▼ button to select "Select Device", then press 

the 

ENTER  button.

.   Press the ▲ or ▼ button to select to a particular device and 

press the 

ENTER  button. It is switched to the selected 

device.

.   If you cannot find a device you want, press the ▲ or ▼ button 

to select "Setup", then press the 

ENTER  button.

5.   Press the ▲ or ▼ button to select "Searching Connections", 

then press the 

ENTER  button. 

 

The message "Configuring Anynet+ connection..."

 is displayed. 

When searching devices completes, the connected devices are 

listed in the Anynet+ menu.

Switching to the selected devices may take up to 2 minutes.  

You cannot cancel the operation during the switching operation.

The time required to scan for devices is determined by the 

number of connected devices.

When the device scan is complete, the number of found 

devices is not displayed.

Although the TV automatically scans devices when it is turned on using the 

POWER button, devices 

connected when the TV is on or under a specific circumstance are not displayed in the device list. 

Therefore select "Searching Connections" menu to search devices.

If you have selected external input mode by pressing the 

SOURCE button, you cannot use the 

Anynet+ function. Make sure to switch to an Anynet+ device by using the 

TOOLS button.

➣

➣

➣

➣

➣



















BN68-01424D-Eng.indd   48

2008-03-03   ¿ÀÈÄ 5:22:13