Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 데이터 시트
제품 코드
1726 502
12
UsbCom Standard / Professional 2.1
©
Software
Via a MC-I Switch (foot switch); select additional values with either „per Measurement“ (i.e. each time the
switch is operated a value will be sent) or „with Measurement No.“ (i.e. the values that are to be send to the
measuring cycle after X-times activation of the switch). How to define the measuring cycle can be found in
section 5.1 MC-Switch.
switch is operated a value will be sent) or „with Measurement No.“ (i.e. the values that are to be send to the
measuring cycle after X-times activation of the switch). How to define the measuring cycle can be found in
section 5.1 MC-Switch.
Select via the Timer the time control settings of a cyclical data request. The cycle can be entered in hours,
minutes and seconds. The timer cycle will be shown as a Timer symbol in the configuration window, the
symbol can be used to start or stop the timer.
minutes and seconds. The timer cycle will be shown as a Timer symbol in the configuration window, the
symbol can be used to start or stop the timer.
Via a keypad, request measured values with a predetermined button on the keyboard e.g. F1, F2 up to F12.
Note:
The functions buttons F1, F2 etc. are deactivated in MS Excel!
Additionally, a pull-down menu for starting and stopping the timer is available, select whether the timer is to
be started and/or stopped via a function key (e.g. F1), a MC-I switch (e.g. foot switch) or global via the timer
button in the status window. In this way several timers for various measuring devices can be simultaneously
started and stopped at the same time.
be started and/or stopped via a function key (e.g. F1), a MC-I switch (e.g. foot switch) or global via the timer
button in the status window. In this way several timers for various measuring devices can be simultaneously
started and stopped at the same time.