Radex RD1706 Radiation Monitor RD1706 데이터 시트
제품 코드
RD1706
«LEVELS» section
Exceeding of a threshold dose rate value which can be set in
«LEVELS» section provokes to alarm signal actuation.
A threshold signal should be switched on when it is necessary to
receive alarm or vibra signals in case of a fixed radiation dose rate
exceeding. User himself sets a value of a threshold signal (range from 0,1 up
to 99,0 μSv/h). Choosing the type of a signal (audio or vibra signal) is made
in «SETUP» section (page
exceeding. User himself sets a value of a threshold signal (range from 0,1 up
to 99,0 μSv/h). Choosing the type of a signal (audio or vibra signal) is made
in «SETUP» section (page
). Thus, if a dose rate is registered during one
observation exceeds the installed threshold level than turns on one of the
two or both signals:
two or both signals:
a) when AUDIO signal is activated than with every quantum
captured the sound signal will occur. If the selected threshold exceeds
3,0 μSv/h than a single sound signal is heard;
b) when vibra signal is on it will function till the end of the cycle of
observation.
When a threshold signal is off, audio signal actuates with every
registered quantum and a vibra-call does not function at all.
Example of changing a level of a threshold signal from 0,30 μSv/h to
, 0 μSv/h is presented below.
22
4 5
15