Gw Instek PEL-3021 Electronic Load PEL-3021 데이터 시트
제품 코드
PEL-3021
PEL-3000 User Manual
70
Advanced Configuration Settings
Use the advanced configuration settings to configure settings other
than those described in the basic configuration chapter.
than those described in the basic configuration chapter.
Soft Start Setting
Description
The soft start setting is used to limit the amount
of input current at start-up or from when the
Von Voltage threshold is tripped.
of input current at start-up or from when the
Von Voltage threshold is tripped.
The soft start setting only applies to CC, CR and
CP mode.
CP mode.
Input I
Time
Soft Start = ON
Input I
Time
Soft Start= OFF
Rise voltage
Rise current
Rise current
Rise voltage
Operation
1. Press
Main
> Configure[F5] > Other[F2] and
set the Soft Start time.
Range:
OFF, 1~200ms