Atmel ATSTK500 500 Starter kit and development system. ATSTK500 ATSTK500 데이터 시트

 

2591C-AVR-06/06 

Table 5-54. Command format 

Command ID 

1 byte 

CMD_ENTER_ 
PROGMODE_HVSP 

Command id 

StabDelay 

1 byte 

XML: stabDelay 

Delay (in ms) used for pin stabilization 

CmdexeDela
y 

1 byte 

XML: cmdexeDelay 

Delay (in ms) in connection with the 
EnterProgMode command execution 

SynchCycles 

1 byte 

XML: synchCycles 

Number of synchronization clock 
cycles 

LatchCycles 

1 byte 

XML: latchCycles 

Number of PulseXtal1_HVSP cycles 

ToggleVtg 

1 byte 

XML: toggleVtg 

Toggle Vtg when entering prog.mode 
(0=no, 1=yes). For parts with 
RSTDSBL functionality 

PowoffDelay 

1 byte 

XML: powoffDelay 

Power-off delay. Additional delay (in 
ms) after Vtg is turned off in order to 
make sure the Vtg is low enough 

resetDelay1 

1 byte 

XML: resetDelay1 

RSTDELAY #1 (in ms) Additional delay 
between Vtg is turned on and reset 
goes high. 

resetDelay2 

1 byte 

XML: resetDelay2 

RSTDELAY #2(in us x 10) Additional 
delay between Vtg is turned on and 
reset goes high. Total delay is 
RSTDELAY #1 (ms) + RSTDELAY #2 
(us x 10) 

 

Table 5-55. Answer format 

Answer ID 

1 byte 

CMD_ENTER_ 
PROGMODE_HVSP 

Answer id 

Status 1 

byte 

STATUS_CMD_OK or 
STATUS_CMD_FAILED 

A Result Value indicating the result of 
the operation. If failed the target 
voltage is >5.5V or <4.5V 

This command will make the target device leave programming mode if it succeeds. 

XML path: /AVRPART/ICE_SETTINGS/STK500_2/HvspLeaveProgMode/ 

Table 5-56. Command format 

Command ID 

1 byte 

CMD_LEAVE_ 
PROGMODE_HVSP 

Command id 

stabDelay 

1 byte 

XML: stabDelay 

Delay (in ms) used for pin stabilization 

resetDelay 

1 byte 

XML: resetDelay 

Delay (in ms) in connection with the 
LeaveProgMode command execution 
and Reset_low_duration