Atmel SAM4S Xplained Pro Starter and Evaluation Kit ATSAM4S-XPRO ATSAM4S-XPRO 데이터 시트

제품 코드
ATSAM4S-XPRO
다운로드
페이지 1231
1139
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
44.4.3 Active Mode Power Consumption
The active mode configuration and measurements are defined as follows:
VDDIO
 
= VDDIN = 3.3V
VDDCORE = 1.2V (internal voltage regulator used)
T
= 25°C
Application running from Flash memory with128-bit access mode 
All peripheral clocks are deactivated.
Master Clock (MCK) running at various frequencies with PLLA or the fast RC oscillator.
Current measurement on AMP1 (VDDCORE) and total current on AMP2
Figure 44-10. Active Mode Measurement Setup
Tables below give Active mode current consumption in typical conditions.
VDDCORE at 1.2V
Temperature = 25°C
VDDIO
VDDOUT
VDDCORE
VDDIN
Voltage
Regulator
VDDPLL
3.3V
AMP1
AMP2