Atmel ATSTK500 500 Starter kit and development system. ATSTK500 ATSTK500 데이터 시트

2525B–AVR–04/03

Program Extended Fuse bits. The Fuse bit mapping for the currently supported devices
is described in the appendix.

Note:

For ISP Programming, use the Cmnd_STK_UNIVERSAL command with the appropriate
ISP command bytes (found in the device data sheet).

Cmnd_STK_PROG_FUSE_EXT, fuse_low, fuse_high, fuse_ext, Sync_CRC_EOP

0x65

Resp_STK_INSYNC, Resp_STK_OK 

or

Resp_STK_NOSYNC (If no Sync_CRC_EOP received)

Program Lock bits. The Lock bit mapping for the currently supported devices is
described in the appendix.

Note:

For ISP Programming, use the Cmnd_STK_UNIVERSAL command with the appropriate
ISP command bytes (found in the device data sheet).

Cmnd_STK_PROG_LOCK, Synch_CRC_EOP

0x63

Resp_STK_INSYNC, Resp_STK_OK 

or

Resp_STK_NOSYNC (If no Sync_CRC_EOP received)

Table 15.  Parameters

fuse_low

Low byte of Fuse bits

1 byte

fuse_high

High byte of Fuse bits

1 byte

fuse_ext

Extended byte of Fuse bits

1 byte

Table 16.  Parameters

lock

Lock bits as defined by datasheets

[BYTE]