Atmel Evaluation Kit for ATXMEGA384C3, 8/16-bit XMEGA C3 Microcontroller Atmel ATXMEGAC3-XPLD ATXMEGAC3-XPLD 데이터 시트

 

 

Atmel AVR1925: XMEGA-C3 Xplained Hardware User’s Guide [APPLICATION NOTE] 

42053A

−AVR−02/2013 

5

Do not power the board without having the jumper or an amperemeter mounted since this can cause 
latch-up of the Atmel AVR ATxmega384C3 due to current flow into the I/O pins. 

The kit can be programmed either from an external programming tool or through an USB boot loader which is pre-
programmed on the device. 

The boot loader is evoked by pushing the push button (SW0) during power-on, that is push and hold the button and 
hence connect an USB cable to the kit. Programming can be performed through the DFU programmer FLIP. 

How a programmer can be connected to the kit is described in Section 

.