Atmel Evaluation Kit for ATXMEGA384C3, 8/16-bit XMEGA C3 Microcontroller Atmel ATXMEGAC3-XPLD ATXMEGAC3-XPLD 데이터 시트
제품 코드
ATXMEGAC3-XPLD
Atmel AVR1939: XMEGA-C3 Xplained Getting Started Guide [APPLICATION NOTE]
42054A
−AVR−02/2013
6
2.1
Programming the kit
2.1.1 Using the bootloader
The kit can be programmed either from an external programming tool or through a USB bootloader which is pre-
programmed on the device. The bootloader is evoked by pushing the push button (SW0) during power-on, for example
push and hold the button and hence connect an USB cable to the kit. Programming can be performed through the DFU
programmer FLIP. How to use FLIP to download new firmware to the kit is described in-depth in the application note
Atmel AVR1929: USB DFU Bootloader for XMEGA A3.
programmed on the device. The bootloader is evoked by pushing the push button (SW0) during power-on, for example
push and hold the button and hence connect an USB cable to the kit. Programming can be performed through the DFU
programmer FLIP. How to use FLIP to download new firmware to the kit is described in-depth in the application note
Atmel AVR1929: USB DFU Bootloader for XMEGA A3.
2.1.2 Using a programming tool
If it is desired to program the kit without the help of the on-chip bootloader, or if debugging is required, it is possible to
do this with various tools. The most common tools and how they can be connected are listed in Chapter
do this with various tools. The most common tools and how they can be connected are listed in Chapter
. Atmel Stu-
dio
®
6 can be used as front-end for these programming tools.