Atmel EVK1100 500 Starter kit and development system ATEVK1100 ATEVK1100 데이터 시트
제품 코드
ATEVK1100
AVR32 EVK1100 Getting Started Guide
-2
7713A–AVR32–05/07
The next step is to access the Control Panel through its web server with a direct point-
to-point connection between a PC and the EVK1100 board.
to-point connection between a PC and the EVK1100 board.
Configuring the PC
network port to local
mode (Windows XP)
network port to local
mode (Windows XP)
Most computers are setup to use dynamic IP addresses. To directly connect the
EVK1100 to a PC, the network interface of the PC must be configured to use a static IP
address. The goal of this section is to perform such a configuration.
EVK1100 to a PC, the network interface of the PC must be configured to use a static IP
address. The goal of this section is to perform such a configuration.
Step 1: Select Start−>Settings−>Network Connections.
Step 2: Right-click on the network connection where the EVK1100 will be plugged to
and select Properties. There may be several defined connections on the PC: the
connection associated with the Ethernet port of the PC must be selected.
connection associated with the Ethernet port of the PC must be selected.