Atmel Evaluation Kit AT91SAM9G25-EK AT91SAM9G25-EK 데이터 시트
![Atmel](https://files.manualsbrain.com/attachments/0369829915bda09f9c2e00fb805a7753579683b5/common/fit/150/50/8d2bf08978ec3e5bc63f4343ac5e91ce8d0e40045619fa520d910d64af8f/brand_logo.png)
제품 코드
AT91SAM9G25-EK
559
SAM9G25 [DATASHEET]
11032D–ATARM–10-Mar-2014
Figure 32-18.Stall Handshake Data IN Transfer
32.6.11 Speed Identification
The high speed reset is managed by the hardware.
At the connection, the host makes a reset which could be a classic reset (full speed) or a high speed reset.
At the end of the reset process (full or high), the ENDRESET interrupt is generated.
Then the CPU should read the SPEED bit in UDPHS_INTSTAx to ascertain the speed mode of the device.
32.6.12 USB V2.0 High Speed Global Interrupt
Interrupts are defined in
(UDPHS_IEN) and in
(UDPHS_INTSTA).
32.6.13 Endpoint Interrupts
in UDPHS_EPTCTLENBx (see
).
Token IN
Stall PID
USB Bus
Packets
Packets
Cleared by Firmware
Set by Firmware
FRCESTALL
STALL_SNT
Set by Hardware
Cleared by Firmware
Interrupt Pending
Table 32-5. Endpoint Interrupt Source Masks
SHRT_PCKT
Short Packet Interrupt
BUSY_BANK
Busy Bank Interrupt
NAK_OUT
NAKOUT Interrupt
NAK_IN/ERR_FLUSH
NAKIN/Error Flush Interrupt
STALL_SNT/ERR_CRC_NTR
Stall Sent/CRC error/Number of Transaction
Error Interrupt
Error Interrupt
RX_SETUP/ERR_FL_ISO
Received SETUP/Error Flow Interrupt
TXRDY_TRER
TX Packet Read/Transaction Error Interrupt
TX_COMPLT
Transmitted IN Data Complete Interrupt
RXRDY_TXKL
Received OUT Data Interrupt
ERR_OVFLW
Overflow Error Interrupt
MDATA_RX
MDATA Interrupt
DATAX_RX
DATAx Interrupt