Mikroelektronika MIKROE-742 데이터 시트
PWM_Init
323
MIKROELEKTRONIKA
- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroPASCAL PRO for AVR
CHAPTER 6
Prototype
procedure PWM_Init(wave_mode : byte; prescaler : byte; inverted :
byte; duty : byte);
byte; duty : byte);
Returns
Nothing.
Description
Initializes the PWM module. Parameter wave_mode is a desired PWM mode.
There are two modes: Phase Correct and Fast PWM. Parameter prescaler
chooses prescale value N = 1,8,64,256 or 1024 (some modules support 32 and
128, but for this you will need to check the datasheet for the desired MCU).
Paremeter inverted is for choosing between inverted and non inverted PWM
signal. Parameter duty sets duty ratio from 0 to 255. PWM signal graphs and
formulas are shown below.
There are two modes: Phase Correct and Fast PWM. Parameter prescaler
chooses prescale value N = 1,8,64,256 or 1024 (some modules support 32 and
128, but for this you will need to check the datasheet for the desired MCU).
Paremeter inverted is for choosing between inverted and non inverted PWM
signal. Parameter duty sets duty ratio from 0 to 255. PWM signal graphs and
formulas are shown below.