Mikroelektronika MIKROE-742 데이터 시트

440

- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD

CHAPTER 6

procedure SPI_T6963C_set_cursor(x, y : byte);

Nothing.

Sets cursor to row x and column y.

Parameters : 

- 

x

: cursor position row number 

- 

y

: cursor position column number 

Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.

SPI_T6963C_Set_Cursor(cposx, cposy);

procedure SPI_T6963C_clearBit(b : byte);

Nothing.

Clears control port bit(s).

Parameters : 

- 

b

: bit mask. The function will clear bit x on control port if bit x in bit mask is set 

to 1. 

Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.

// clear bits 0 and 1 on control port

SPI_T6963C_ClearBit(0x03);

procedure SPI_T6963C_setBit(b : byte);

Nothing.

Sets control port bit(s).

Parameters : 

- 

b

: bit mask. The function will set bit x on control port if bit x in bit mask is set to 1. 

Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.

// set bits 0 and 1 on control port

SPI_T6963C_SetBit(0x03);