Reely Electr. single-rotor helicopter RtF (mSP190) mSP190 데이터 시트
제품 코드
mSP190
54
16. Troubleshooting
Even though the model and the remote control system were built to the state of the art, there may still be malfunctions
or faults. For this reason, we would like to give you some information on how to deal with possible problems.
Problem
Remedy
Transmitter doesn’t respond.
• Check the batteries in the transmitter.
• Check the polarity of the batteries in the transmitter.
• Check on/off switch. .
• Check the polarity of the batteries in the transmitter.
• Check on/off switch. .
Transmitter switches off on its own at once or
after a short period.
• Check or replace the batteries in the transmitter.
Model does not react, LED in the helicopter flas-
hes slowly.
• Check function of the remote control transmitter
• Perform binding of the model helicopter.
• Perform binding of the model helicopter.
Rotors do not start.
• Check flight battery charging state.
• Check ease of movement of the mechanics.
• Set the pitch trim to the middle position.
• Check ease of movement of the mechanics.
• Set the pitch trim to the middle position.
Helicopter does not lift off the ground.
• Check flight battery charging state.
• Check ease of movement of the drive mechanics.
• Replace flight battery.
• Check ease of movement of the drive mechanics.
• Replace flight battery.
Helicopter shows too little performance or too
short flight times.
• Check flight battery charging state.
• Check ease of movement of the drive mechanics.
• Replace flight battery.
• Check ease of movement of the drive mechanics.
• Replace flight battery.
Helicopter always flies in one direction.
• Adjust transmitter trimming.
• Adjust swash plate.
• Difficult flight conditions (wind or draft)
• Adjust swash plate.
• Difficult flight conditions (wind or draft)
Helicopter rotates around the vertical axis (rotor
shaft).
• Repeat switching on and ensure that the helicopter is not
moved or rotated.
• Set the tail trimming
• Check ease of movement of the tail rotor.
• Check ease of movement of the tail rotor.