Uhlenbrock 65100 Intellibox II DCC System 65100 데이터 시트
제품 코드
65100
Intellibox II
150
13. LocoNet Programming
The Intellibox II Main Menu has a submenu for programming Uhlenbrock LocoNet modules
such as feedback modules or Switch-Control.
The modules are programmed with LocoNet configuration variables (LNCVs for short).
These LNCVs determine the settings and function of the module and can have different
purposes in different modules.
The description of the individual LNCVs and connection of the modules are outlined in the
respective manuals.
If a number of the same type of module are used on a model railway layout they need a
module address for programming, so that the center knows module being referred to.
Every new module has a default address assigned to it. This can be obtained in the
respective manual. The module address for every module is found in LNCV 0.
To program a LocoNet module, firstly connect it to the LocoNet. Then press the Intellibox II
[mode]-key. The following appears:
such as feedback modules or Switch-Control.
The modules are programmed with LocoNet configuration variables (LNCVs for short).
These LNCVs determine the settings and function of the module and can have different
purposes in different modules.
The description of the individual LNCVs and connection of the modules are outlined in the
respective manuals.
If a number of the same type of module are used on a model railway layout they need a
module address for programming, so that the center knows module being referred to.
Every new module has a default address assigned to it. This can be obtained in the
respective manual. The module address for every module is found in LNCV 0.
To program a LocoNet module, firstly connect it to the LocoNet. Then press the Intellibox II
[mode]-key. The following appears:
Step 1
Step 2