Native Instruments Traktor Kontrol S4 MK2 22400 데이터 시트
제품 코드
22400
4.7.3
Overdubbing
You can also dub over the current recorded loop, building additional recorder layers on the fly.
To do this:
1.
To do this:
1.
Press the
REC
button while the Loop Recorder is already playing an existing loop, and
press
REC
again to exit overdubbing.
The new audio will then be added to the existing loop.
2.
If you don’t like the overdub, just hit
UNDO
and it will clear your last overdub and you
can try it again.
3.
If you hit
UNDO
once more, it will act as a “redo” and bring back the overdub.
4.
If you want to completely clear all the contents of the Loop Recorder, just press
UNDO
while the Loop Recorder is stopped.
4.7.4
Further Uses of the Recorded Loop
One of the great things about the Loop Recorder is that you can use it to record loops that you
can then transfer to the Remix Decks. To do this, we will use the Copy mode on the S4:
1.
1.
Hold down the
BROWSE
button to enter Copy mode.
You will see the
PLAY
button on the
Loop Recorder
start flashing, letting you know that it
contains a loop ready to be copied.
2.
While holding the
BROWSE
button, press the
PLAY
or
REC
button on the Loop Recorder
to select it as source.
3.
Still holding the
BROWSE
button, press any flashing Sample Play button in the Remix
Decks to select it as target.
→ Now the loop has been stored in a Sample Slot, and you can record a new loop into the
Loop Recorder if you like. Moreover, your loop now has access to all Sample-related fea-
tures provided by the Remix Deck. Last but not least, as already mentioned, the loop is
automatically added to your Collection!
tures provided by the Remix Deck. Last but not least, as already mentioned, the loop is
automatically added to your Collection!
Tutorials
Using the Loop Recorder
Traktor Kontrol S4 - Manual - 65