Mc Crypt MP-5000 POWER AMPLIFIER MP-5000 데이터 시트

제품 코드
MP-5000
다운로드
페이지 65
20
Intended Use
The Mc Crypt power amplifier is used to amplify low-level audio signal in home- or semi-professional audio systems;
it is switched between the signal source to be amplified and the speakers.
The power amplifier is designed to control speakers with a minimum impedance of 4 Ohm per channel. The device
must only be controlled by a low-level audio source.
The product is only approved for connection to 220 - 240 V/50 - 60 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!
Explanation of Symbols
This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation.
The lightning symbol in a triangle warns against unprotected live components or elements
inside the housing or “live” connection points. Touching these components or connection
points may pose a danger to life.
Lines must only be connected to such connection points by specialists, or lines ready for
connection must be used.
The device contains no parts that require servicing by the user. Therefore, never open the
device.
The arrow symbol indicates special advice and operating information.
The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.