Mc Crypt MP-5000 POWER AMPLIFIER MP-5000 데이터 시트
제품 코드
MP-5000
24
Installation/Setup
The power amplifier can be set up on a level surface or installed in a 19" rack.
When selecting the set-up or installation site, observe that direct sunlight, vibration, dust, heat,
cold and moisture must be avoided. There also must not be any strong transformers in the
device’s proximity.
cold and moisture must be avoided. There also must not be any strong transformers in the
device’s proximity.
Ensure sufficient ventilation when setting up the device with other equipment. Keep a sufficient
distance from heat sources. Never put up the power amplifier in direct proximity in of heat
sources. Do not point any strong spotlights or light sources towards the device. This may
cause overheating (danger of fire!).
distance from heat sources. Never put up the power amplifier in direct proximity in of heat
sources. Do not point any strong spotlights or light sources towards the device. This may
cause overheating (danger of fire!).
Heat dissipation from the device must not be obstructed. Never place the device on any soft
surfaces such as a carpet or a bed. Never cover the device’s ventilation openings. Air
circulation must not be obstructed by objects such as magazines, tablecloths, curtains or
similar. This prevents heat dissipation from the device and may lead to overheating (danger of
fire!).
surfaces such as a carpet or a bed. Never cover the device’s ventilation openings. Air
circulation must not be obstructed by objects such as magazines, tablecloths, curtains or
similar. This prevents heat dissipation from the device and may lead to overheating (danger of
fire!).
Always remove both rack covers in operation if the device is rack-mounted!
Only operate the power amplifier on a stable underground that is not sensitive to heat, and in
a horizontal position; otherwise, air circulate is not warranted correctly.
a horizontal position; otherwise, air circulate is not warranted correctly.
Ensure secure attachment or stable set-up. The power amplifier is heavy and therefore poses
considerable danger of accidents.
considerable danger of accidents.
Do not drill or screw any additional screws into the casing to mount the device. This may
expose dangerous voltage to touch.
expose dangerous voltage to touch.
Make sure that the connection cables are not squeezed or damaged by sharp edges. Always
place cables so that no one can trip over them or be caught in them. Danger of injury!
place cables so that no one can trip over them or be caught in them. Danger of injury!
The cables must be sufficiently long. Do not put any mechanic strain on them. This may damage
the cables or device. There is a risk of dangerous electric shock.
the cables or device. There is a risk of dangerous electric shock.
Due to the diversity of furniture paints and polishes used, it is possible that the device’s feet will leave
visible residue on furniture due to chemical reaction. The device therefore should not be placed on
valuable furniture surfaces without any suitable protection.
visible residue on furniture due to chemical reaction. The device therefore should not be placed on
valuable furniture surfaces without any suitable protection.