Sygonix Surveillance Camera 20815Q 20815Q 사용자 설명서
제품 코드
20815Q
32
The home technology brand for the entire house. More information at www.sygonix.com
9. Maintenance and Cleaning
Servicing or repair must only be carried out by a specialist or specialist workshop. There are no
components inside the product that need maintenance by you, this is why you should never open/
disassemble it (apart from the assembly and commissioning work described in these instruc-
tions).
A dry, soft and clean cloth is suffi cient for cleaning the outside. Do not press on the lens or hous-
ing too strongly. This will lead to scratches.
Dust can be removed easily using a long-hair, soft and clean brush and a vacuum cleaner.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since
these may damage the casing or even impair function.
components inside the product that need maintenance by you, this is why you should never open/
disassemble it (apart from the assembly and commissioning work described in these instruc-
tions).
A dry, soft and clean cloth is suffi cient for cleaning the outside. Do not press on the lens or hous-
ing too strongly. This will lead to scratches.
Dust can be removed easily using a long-hair, soft and clean brush and a vacuum cleaner.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since
these may damage the casing or even impair function.
10. Troubleshooting
No camera image
• Set the screen to the correct input channel.
• Check the voltage/current supply of the camera.
If the cable is too long, the voltage in the cable will drop. Use a cable with a larger cross-section
• Set the screen to the correct input channel.
• Check the voltage/current supply of the camera.
If the cable is too long, the voltage in the cable will drop. Use a cable with a larger cross-section
if required.
• Check the camera’s cable connections.
• For long video cables, try connecting a test screen or something similar to the camera with a
• For long video cables, try connecting a test screen or something similar to the camera with a
shorter cable.
Use a higher-quality video cable or video pre-amplifi er if required.
Only black/white camera image
• Check the setting in the setup menu.
• At night, the camera will automatically switch to black/white display (at the same time, all
• Check the setting in the setup menu.
• At night, the camera will automatically switch to black/white display (at the same time, all
IR LEDs are activated). Colour display is not possible here.
Screen too bright
• Check the settings in the setup menu; reset the camera to factory settings if required.
• Never point the camera at the sun or a lamp.
• Select the corresponding settings in the setup menu, e.g. for white balance, etc.
• Check the settings in the setup menu; reset the camera to factory settings if required.
• Never point the camera at the sun or a lamp.
• Select the corresponding settings in the setup menu, e.g. for white balance, etc.