Weistek WT IdeaWerk 3D printer WT150 데이터 시트

제품 코드

WT150

Quick Set Up Guide

Shenzhen Weistek Co., Ltd

Add.: RM2301, Shenzhen Overseas Chinese High-Tech Venture Park, Shenzhen, P. R. China

Website:

4. Preparations before printing

Notice: Please insert the SD card into your Ideawerk before printing,

otherwise the software will not be able to connect your Ideawerk. If

your Ideawerk is disconnected with your pc due to interruption,

please pull out and re-insert the USB cable.

4.1 Building plate Calibration and Z-height Measurement

Each Ideawerk is pre-calibrated, while the building plate and the

Z-height may be affected during transportation.

4.1.1 Turn on the Power Switch of your Ideawerk, and connect your pc

with your Ideawerk by the USB cable. Open DoraWare-W 1.0, click

[Flush] and select the Combo, then click [Connect] to connect your

Ideawerk.

Notice: each Ideawerk has a different Combo Number. In this case,

the Combo Number is COM15. The Combo Number can also be

traced in the Device Manager. (Pic 3.3-01)

(Pic 4.1-01)