3D Systems 350166 데이터 시트

Cleaning the Touchscreen

•

Wipe the touchscreen with the soft, lint-free cloth. Do not spray cleaners on the

touchscreen.

4 Amp Fuse Replacement

1. 4 Amp, 250V fast blow fuse is located on the back left side of your Cube.

Caution: Before replacing the fuse, switch Cube’s power off and unplug power cord.

2. Using a flat screwdriver, turn screwdriver counterclockwise to remove fuse from the fuse holder.

3. Using a flat screwdriver, turn screwdriver clockwise to install new fuse into the fuse holder. After new fuse is

installed, plug power cord into outlet and switch power on.