Western Digital My Passport Studio 320GB WDMS3200TE 사용자 설명서
제품 코드
WDMS3200TE
MY PASSPORT STUDIO PORTABLE HARD DRIVE
USER MANUAL
ABOUT YOUR WD DRIVE – 3
About Your WD Drive
Features
LED Indicators
The power/activity and capacity gauge indicators are represented by four LEDs
underneath the sliding port cover as shown above. Only one LED illuminates at a time
corresponding to drive capacity used.
underneath the sliding port cover as shown above. Only one LED illuminates at a time
corresponding to drive capacity used.
Power/Activity LED Behavior
Capacity Gauge
The capacity gauge is enabled only through installation of WD Drive Manager, which
must be installed on each system to which My Passport is connected. The capacity
gauge is updated automatically upon drive usage.
must be installed on each system to which My Passport is connected. The capacity
gauge is updated automatically upon drive usage.
The capacity gauge consists of four sections which illuminate left to right to indicate
space used on the drive during power-on state. Each section represents
approximately 25 percent of drive capacity. Because this drive is preformatted and
contains software and utilities, the first section is illuminated upon installation.
space used on the drive during power-on state. Each section represents
approximately 25 percent of drive capacity. Because this drive is preformatted and
contains software and utilities, the first section is illuminated upon installation.
Appearance
Drive State
Steady
Power-on state or power-save mode
Slow flashing
Drive standby
Alternating left to right then right to left
Drive in use
2
Cover slides to the left
USB 2.0
LEDs
FireWire 400
Storage Used
0-24 percent
25-49 percent
50-74 percent
75-100 percent