Wachendorff URDR0001 PID Temperature Controller URDR0001 데이터 시트
제품 코드
URDR0001
Universal PID-Controller for DIN-Rail URDR
l PID-Controller for mounting on DIN-Rail
l Universal AC/DC power supply
l Universal input für process signals, thermocouple, RTD
l 2-line LED display
l Easy programming via software or push buttons
l Analogue output or SSR output
l 2 alarm outputs
l Universal AC/DC power supply
l Universal input für process signals, thermocouple, RTD
l 2-line LED display
l Easy programming via software or push buttons
l Analogue output or SSR output
l 2 alarm outputs
This compact universal controller for DIN-Rail mounting is an all-
rounder. With the universal input for the most common temperature
sensors and process signals combined with the universal power
supply and the newest programming and control technologies, this
PID-controller is the best solution for sophisticated applications. This
controller is usable as a classic PIC controller, as well as a signal
conditioner (18 different input signals and a galvanic isolated
analogue output)
Beside the excellent price/performance-ratio, this controller
convinces with his robust housing and brilliant display.
rounder. With the universal input for the most common temperature
sensors and process signals combined with the universal power
supply and the newest programming and control technologies, this
PID-controller is the best solution for sophisticated applications. This
controller is usable as a classic PIC controller, as well as a signal
conditioner (18 different input signals and a galvanic isolated
analogue output)
Beside the excellent price/performance-ratio, this controller
convinces with his robust housing and brilliant display.
Display: 2-line LED-Display
Upper line: Process value, 4-digit, green with 10.2 mm digits
Lower line: Setpoint, 4-digit, red with 7,6 mm digits
Upper line: Process value, 4-digit, green with 10.2 mm digits
Lower line: Setpoint, 4-digit, red with 7,6 mm digits
Indicators: Eight red indicators for relais outputs, alarm status, serial
communication and tuning..
C1, C2
communication and tuning..
C1, C2
ON, when output is active.
C1 as relay/SSR/mA/voltoutput or C1 (opening)
and C2 (closing) for electronic valves
and C2 (closing) for electronic valves
A1, A2,A3 ON, when alarm is active
MAN
MAN
ON, when the function “manual” is switched on
TUN
ON, when controller is in “autotune” mode
REM
ON when serial communication is active
Buttons: 3 push buttons for programming and setting up the
setpoints.
setpoints.
Input ranges: Configuration of the input signal via software or push
buttons.
Thermocouples type K, S, R, J; internal cold junction (from 0 °C to
50 °C; accurracy of cold junction 0,1 °C/°C)
RTD: Pt100, Pt500, Pt1000, Ni100, PTC1K, NTC10K
Linear inputs: 0 V to 10 V, 0/4 mA to 20 mA, 0 mV to 40 mV
Potentiometer: 1 kOhm to 6/160 kOhm
buttons.
Thermocouples type K, S, R, J; internal cold junction (from 0 °C to
50 °C; accurracy of cold junction 0,1 °C/°C)
RTD: Pt100, Pt500, Pt1000, Ni100, PTC1K, NTC10K
Linear inputs: 0 V to 10 V, 0/4 mA to 20 mA, 0 mV to 40 mV
Potentiometer: 1 kOhm to 6/160 kOhm
Accurracy: Tolerance at 25 °C +/-0.2 % ± 1 digit for thermocouple
input, RTD input and analogue input signal.
input, RTD input and analogue input signal.
Measuring rate: Programmable up to 4,1 msec. (242 Hz).
User input: ( switchable via contact input signal).
Alternative usable functions: Hold/freeze values, selecting setpoint 1
to 4, activating tuning function.
Alternative usable functions: Hold/freeze values, selecting setpoint 1
to 4, activating tuning function.
Thermal amperometer input: max. 50 mA with 80 msek. Cycle.
Excitation: +12 VDC @ 30 mA
Wachendorff Prozesstechnik GmbH & Co. KG
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff.de
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff.de
Relay output: 1 change over relay with 5 A @ 250 VAC. Programmable
as controller output for heating/cooling and/or alarm
as controller output for heating/cooling and/or alarm
Analogue/SSR-output: Selectable via jumper. Programmable
analogue output 0 VDC to 10 VDC or 0/4 mA to 20 mA with a resolution
of 4.000 steps. Programmable as controller output or retransmission
process/setpoint value. SSR-output 12 VDC @ max. 30 mA.
analogue output 0 VDC to 10 VDC or 0/4 mA to 20 mA with a resolution
of 4.000 steps. Programmable as controller output or retransmission
process/setpoint value. SSR-output 12 VDC @ max. 30 mA.
Communication port: RS485 with Modbus RTU as slave.
Supply:
24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz; 5,5 VA
24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz; 5,5 VA
Wiring plan:
Protection class: IP20 from the front and back plane.
Housing: Blue and robust plastic case. Plastic front panel with silicone
pad..
pad..
Dimensions: W 72 mm x H 908 mm x D 64 mm.
Connection: Via removable terminal block. .
Ambient conditions: Operating temperature: 0 °C to +45 °C; relative
humidity 35 % to 95 %. rF, non condensing..
humidity 35 % to 95 %. rF, non condensing..
Weight: 165 gramms
Scope of delivery: Controller, manual..
Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestraße 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 07.05.2012.
All information without guarantee and subject to change.
All information without guarantee and subject to change.
URDR