Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 데이터 시트

 

User interface 

 

2.8 Menu bar 

LOGO!Soft Comfort Online Help 
Operating Instructions, 06/2014 

101

 

Configuring client connections 

Right click the desired connection and choose to add a client connection. 
Double-click the connection item to configure the client connection.  

 

①

 

Here you define the properties of the Client. 
TSAP is the Transmission Layer Service Access Point in TCP/IP communication.  
The local TSAP of Client is automatically generated by LOGO!Soft Comfort. 

②

 

Here you define the properties of the Server.  
The remote TSAP is the TSAP of the Server that you want to connect. 
The remote IP address is the IP address of the Server that you want to connect. 

③

 

Here you define the properties of the data transfer connection. (Read:Client <- Server, Write: 

Client -> Server) 
You can create a maximum of 32 data transfers in a Client connection.  
In the read process, the local Base Module reads data from the remote server and stores it; in 

the write process, the local Base Module writes data to the remote server. You can store data 

either on the local Base Module or the remote Server by specifying the corresponding column. 

The maximum transfer data length is 212 bytes for every data transfer. 

④

 

Here you define the time interval that LOGO! Base Module checks the connection. 
You can select the check box and input the specified time interval.