Tandberg Data RDX QuikStor Internal Drive 8510-RDX 전단
제품 코드
8510-RDX
Mounting Screws:
Secure unit in standard
3.5 inch or 5.25 inch bay
Secure unit in standard
3.5 inch or 5.25 inch bay
Power Adapter Cable:
Provides power to the unit
Provides power to the unit
SATA Data Cable:
Connects RDX unit to
the host
Connects RDX unit to
the host
Warranty Card
RDX
Utilities and
Backup Software CD:
Contains more detailed
information on the RDX
system, as well as
the utility software and
backup application
Contains more detailed
information on the RDX
system, as well as
the utility software and
backup application
Internal SATA version
Check Your Accessory Kit Contents
Insert the cartridge in the unit with the keyed corner
facing the upper left corner of the unit and the write
protect tab on the back right. The cartridge only fits
in one orientation. Push the cartridge gently into the
unit until it is locked in place with a clicking sound.
facing the upper left corner of the unit and the write
protect tab on the back right. The cartridge only fits
in one orientation. Push the cartridge gently into the
unit until it is locked in place with a clicking sound.
Loading the Cartridges
Although the RDX
cartridges are ruggedly
built they must be handled
with care to ensure data
integrity and long life.
cartridges are ruggedly
built they must be handled
with care to ensure data
integrity and long life.
Handling Cartridges
Operating the RDX System
Write Protect
Keyed
Corner
Corner
Wait until the cartridge Activity LED is off. Then
push the Eject Button. When the cartridge has been
ejected, grasp the exposed sides of the cartridge
and pull the cartridge out. Store in its container.
push the Eject Button. When the cartridge has been
ejected, grasp the exposed sides of the cartridge
and pull the cartridge out. Store in its container.
Unloading the Cartridges
Eject Button
Activity LED
www.tandbergdata.com
Product Registration
Register this product today at
http://tandbergdata.com/register
©2008. RDX is a registered trademark of ProStor Systems, Inc.
Part no. 433649-03
Part no. 433649-03
Eject Button/Power LED
The Eject Button is illuminated by a Power LED
The table describes the operation of this LED:
The table describes the operation of this LED:
LED Status
Meaning
Description
Off
No Power Unit does not have power
On Green
Ready
Power is On and the unit is working
properly
properly
Blinking Green Ejecting
Unit is rejecting the cartridge
On Amber
Fault
Unit has detected a fault condition.
For more information, run a
diagnostic application
For more information, run a
diagnostic application
Blinking
Amber
Amber
Prevent
Host computer is accessing the
media and the user has pressed
the Eject Button. The unit will eject
the cartridge after the Host access
completes
media and the user has pressed
the Eject Button. The unit will eject
the cartridge after the Host access
completes
Activity LED
The Activity LED displays current cartridge status
The table describes the operation of this LED:
The table describes the operation of this LED:
LED Status
Meaning
Description
On Green
Ready
Cartridge is ready
Blinking Green Activity
Reading, writing, seeking
On Amber
Fault
Unit has detected a cartridge fault
condition. For more information, run
a diagnostic application
condition. For more information, run
a diagnostic application
Quick Start Guide