Bourns PTC fuse Current I(H) 2 A 15 V (L x W x H) 9.5 x 6.71 x 3 mm MF-SM200-2 1 pc(s) MF-SM200-2 데이터 시트
제품 코드
MF-SM200-2
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Customers should verify actual device performance in their specifi c applications.
MF-SM Series - PTC Resettable Fuses
Typical Time to Trip at 23 °C
100
1
10
0.1
0.01
0.001
0.1
1
10
100
Fault Current (Amps)
T
ime to T
rip (Seconds)
M
F-SM
200
M
F-SM
030
M
F-SM
050
M
F-SM
075, M
F-SM
075/60
M
F-SM
100, M
F-SM
100/33
M
F-SM
185/33
M
F-SM
125
M
F-SM
150, M
F-SM
150/33
M
F-SM
250
M
F-SM
300
M
F-SM
260
Typical Part Marking
Represents total content. Layout may vary.
MANUFACTURER'S
TRADEMARK
TRADEMARK
PART IDENTIFICATION
030
0A
DATE CODE -
WEEK 1 OF 2000 = 0A
(YEAR & WEEK)
WEEK 27 OF 2000 = A0
(WEEK & YEAR)
WEEK 1 OF 2000 = 0A
(YEAR & WEEK)
WEEK 27 OF 2000 = A0
(WEEK & YEAR)
Solder Refl ow Recommendations
160–220
300
250
200
150
100
50
0
10–20
Temperature (
°
C)
120
Preheating
Soldering
Cooling
Time (seconds)
Solder refl ow
• Recommended
refl ow methods: IR, vapor phase oven, hot air oven.
• Devices are not designed to be wave soldered to the bottom side of the
board.
board.
• Gluing the devices is not recommended.
• Recommended maximum paste thickness is 0.25 mm (.010 inch).
• Devices can be cleaned using standard industry methods and solvents.
Note:
• If
refl ow temperatures exceed the recommended profi le, devices may not
meet the performance requirements.
Rework
• A device should not be reworked.
Storage Recommendations
The recommended long term storage conditions for Multifuse
®
Polymer PTC devices are 40 °C maximum and 70 % RH maximum. All devices
should remain in the original sealed packaging prior to use. Devices may not conform with data sheet specifi cations if these storage
recommendations are exceeded. Devices stored in this manner have an indefi nite shelf life.
recommendations are exceeded. Devices stored in this manner have an indefi nite shelf life.
MF-SM SERIES, REV. P, 11/10