j5 create Android Mirror JUC600 데이터 시트

2.  Make sure that you are connected to the internet.
3.  Turn your computer on and connect the Android Mirror USB Adapter to the USB Micro-B plug on your 

Android device and to the USB-A plug on a USB 2.0 connection on your computer.

We recommend operating the Android Mirror USB Adapter from a USB 2.0 connection as 
some USB 3.0 connections are not compatible.

4.  The prompt „Auto Play“ appears on your monitor. Click „Open folder to view files“. Should the „Auto Run“ 

function not start, navigate to „Computer“ 

→ hard drive, i.e. „I“ → SETUP.EXE. Double-click the EXE 

file to run it.

5.  Double-click the Android Mirror symbol 

 to start the application.

6.  The product will start the software installation on your PC. The installation may take a few minutes. 

Follow the instructions on your monitor. 
 

 

Should the window “Windows Security” appear, 
choose “Install this software driver anyway” to 
proceed. Should the window “User Account 
Control” appear, click “Yes”. 

7.  After the software has been successfully installed, the Android Mirror symbol 

 will be shown on your 

desktop.

Your Android device (mobile phone or tablet) will load as long as it is connected to the USB 
adapter and the USB connection on your computer.

When you start your Android device (mobile phone or tablet) for the first time, your PC must be connected 
to the internet. Please note that your Android device must be detectable. USB debugging mode must be 
active.
Android 2.3 
Go to Settings 

→ Application → Development → activate USB Debugging.

Android 4.0/4.1 
Go to Settings 

→ Developer Options → activate USB Debugging.

Android 4.2/4.3 
Go to Settings 

→ Phone information → Click on Build Number 7x to enable Developer Options  

→ Enable USB debugging → Disable Verify apps via USB.
1.  Connect the Android Mirror USB Adapter to your Android device and to your computer.

For use with Windows XP, please note:
Ignore the „Found New Hardware Wizard“ and continue with Step 2.

2.  Start the program by double-clicking the Android Mirror symbol 

 .

3.  Follow the instructions in the window „Android Mirror Control“ „How to use“. 

4.  Click „Next“ and „USB driver on PC“. When HTC is used, the driver is downloaded and installed 

automatically. For Samsung/LG and others, the driver must be installed before starting the Android Mirror 
program. Please go to the your mobile phone manufacturer‘s homepage. 

For use with Windows XP, please note:
After downloading the USB driver, click the 
„Found New Hardware Wizard“. Choose the 
option „No, not this time“ and click „Next“. On 
„Android Composite ADB interface“, select 
the option „Install software automatically 
(recommended)“ and click „Next“. The ADB 
(Android Device Bridge) interface driver will 
install.

Android 4.2/4.3 users, please note: 
Confirm  the  option  „Allow  USB  debugging? 
Always allow from this computer.“

 

Use this USB adapter to mirror your Android to your Windows computer and control your Android device’s 
functions using your mouse. You can enter data vie your computer keyboard, write and send messages or 
play pictures/videos from your Android device (mobile phone or tablet).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be 
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the 
product for purposes other than those described above, the product may be damaged. In addition, improper 
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and 
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and 
product names are trademarks of their respective owners. All rights reserved.

•  Android Mirror USB Adapter
•  Operating instructions

•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. These may become dangerous 

playing material for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, 

moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and protect it from 

any accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage 

the product.

•  Also observe the safety and operating instructions of any other devices which are connected 

to the product.

•  Keep the product away from electromagnetic interferences.
•  Never use the product immediately after it has been brought from a cold room into a warm one. 

The condensation generated could destroy the product. The plug-in power supply unit also 
involves danger to life by electric shock! Allow the product to reach room temperature before 
connecting it to the power supply and putting it to use. This may take several hours.

•  Consult an expert when in doubt about operation, safety or connection of the device.
•  Maintenance, modifications and repairs are to be performed exclusively by an expert or at a 

qualified shop.

•  If you have questions which remain unanswered by these operating instructions, contact our 

technical support service or other technical personnel.

Start the set program as administrator to prevent problems from occurring during installation.
It may take a few minutes for your computer to recognize your Android device.
The blue LED on the Android Mirror USB flashes during data transfer.
It is normal for the screen to flash during installation.

1.  Activate USB debugging mode on your Android device. 

Go to Settings 

→ Developer Options →  USB 

debugging.