Buffalo LinkStation 441D 16TB LS441D1604-EU 데이터 시트
제품 코드
LS441D1604-EU
39
• Digital cameras
• USB-connected UPSs
• USB printers
Buffalo external USB drives are recommended.
These devices are not supported:
• DUB and DIU series drives
• Hubs, mice, and keyboards
Connect only one device to a USB port. Some external drives with automatic power-on don't turn on automatically
when connected to the LinkStation. Use their manual switch to turn them on. Be sure to connect only one bus-
powered drive at a time. If there is insufficient bus power for your USB drive, connect its AC adapter. Note that only
the first partition of a connected USB hard drive is mounted. Additional partitions are not recognized.
• USB-connected UPSs
• USB printers
Buffalo external USB drives are recommended.
These devices are not supported:
• DUB and DIU series drives
• Hubs, mice, and keyboards
Connect only one device to a USB port. Some external drives with automatic power-on don't turn on automatically
when connected to the LinkStation. Use their manual switch to turn them on. Be sure to connect only one bus-
powered drive at a time. If there is insufficient bus power for your USB drive, connect its AC adapter. Note that only
the first partition of a connected USB hard drive is mounted. Additional partitions are not recognized.
Note: Hard drives formatted with NTFS, exFAT, ext3, or HFS+ will have read-only access.
Dismounting Drives
If the LinkStation is powered on, dismount external drives before unplugging them. You may dismount external
drives with the function button, or any drives from Settings. If the LinkStation is off, then all drives are already
dismounted and may be unplugged safely.
drives with the function button, or any drives from Settings. If the LinkStation is off, then all drives are already
dismounted and may be unplugged safely.
Note: If you unplug your external drives without dismounting them, Settings may still show "usbdisk" in File
Sharing - Folder Setup. Reboot your LinkStation to clear it.
Sharing - Folder Setup. Reboot your LinkStation to clear it.
Dismounting with the Function Button
If the LinkStation is on, hold down the function button for 3 seconds. The white function LED will go out as all
attached USB drives are dismounted. You may now unplug them safely.
attached USB drives are dismounted. You may now unplug them safely.
Dismounting from Settings on a Computer
1
1
In Advanced Settings, click Drives.
2
Click
to the right of "USB Drives".
3
Select the drive to dismount and click Dismount Disk.