QNAP TS-212P 6TB TS-212P-6TB-WR 데이터 시트

제품 코드

TS-212P-6TB-WR

229

Select the NAS services to be allowed for remote access. Click "Apply to Router". The

NAS will configure the port forwarding on the UPnP router automatically. You will then

be able to access the NAS services from the Internet.

Note :

If more than two NAS are connected to one UPnP router, please specify a

different port for each NAS. If the router does not support UPnP, users are

required to configure port forwarding manually on the router. Please refer to the

links below:

UPnP router compatibility list: http://www.qnap.com/

DDNS/C loud P orta l

With the Cloud Portal, web-based NAS services such as web administration, Web

Server, Multimedia Server, and File Station, can be published to http://www.

myqnapcloud.com. By enabling the NAS services in this step, they are opened for

remote access even if they are not published. Enable the My DDNS service in "Remote

Access Service" and the NAS will notify the myQNAPcloud server automatically if the

WAN IP address of the NAS has changed. To use the myQNAPcloud service, make sure

the NAS has been connected to an UPnP router and the Internet.

Note :

The myQNAPcloud name of each QNAP NAS is unique. One myQNAPcloud name

can only be used with one NAS.

A registered myQNAPcloud name will expire in 120 days if your NAS remains

offline within the period. Once the name is expired, it will be released for new

registration by other users.

Follow the steps below:

1. In "Remote Access Services" > "DDNS/Cloud Portal" > "Cloud Portal", the web-based

NAS services are shown. Select "Publish" to publish the NAS services to

myQNAPcloud website. Select "Private" to hide the published NAS services from

public access. The private services on the myQNAPcloud website are only visible to

specified users with the myQNAPcloud access code. Note that if a disabled NAS