TP-LINK 10/100Mbps WDM MC112CS 데이터 시트
제품 코드
MC112CS
5
Name
Status
Indication
On Power
on
PWR
Off Power
off
On
The Link Fault Pass Through function enable.
LFP
Off
The Link Fault Pass Through function disable.
On
There’s a valid link.
Flashing
The converter is receiving or transmitting
data from the fiber optic connector.
data from the fiber optic connector.
FX
Link/Act
Off
There’s no valid link.
On
The TP port is connected to 100Base-Tx
SPD
Off
The TP port is connected to 10Base-Tx
device or no connection.
device or no connection.
On
The TP port is operating in Full-Duplex
Flashing There’s
a
collision.
FDX/Col
Off
The TP port is operating in Half-Duplex mode.
On
There’s a valid link.
Flashing
The converter is receiving or transmitting
data from the TP port.
data from the TP port.
TP
Link/Act
Off
There’s no connection on the TP port.