TP-LINK Single USB2.0 Port Fast Ethernet Print Server TL-PS110U 사용자 설명서
제품 코드
TL-PS110U
TL-PS110U
Single USB2.0 Port Fast Ethernet Print Server
44
Figure 4-8
¾ Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related
settings automatically from your DHCP server.
¾ IP Address: This option allows you to input IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment.
)
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
¾ Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
¾ Default Router: This option allows you to input gateway from the print server. This IP address
of gateway must meet the router or gateway to go across of the network segment.
4.4 Misc
4.4.1 Factory Default
Click OK to restore the print server to its Factory Default settings.