TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트

 

Click the Select button to quick-select the corresponding port 
based on the port number you entered.   

Select the desired port for IGMP Snooping feature configuration. It 
is multi-optional. 

Displays the port of the switch. 

Select Enable/Disable IGMP Snooping for the desired port. 

Select Enable/Disable Fast Leave feature for the desired port. If 
Fast Leave is enabled for a port, the switch will immediately 
remove this port from the multicast group upon receiving IGMP 
leave messages. 

Select Enable/Disable multicast filtering feature on the port. 

Select the action mode to process multicast packets when the 
multicast IP is in the filtering IP-range. 


  Permit: Only the multicast packets whose multicast IP is in the 

IP-range will be processed. 



  Deny: Only the multicast packets whose multicast IP is not in 

the IP-range will be processed. 

Enter the IP-range ID the port will be bound to. The binding 
IP-range IDs of the port can be cleared by entering null value in 
this field and click Apply button to submit the configuration. 

Specify the maximum number of multicast groups to prevent some 
ports taking up too much bandwidth. 

Displays the LAG number which the port belongs to. 

1.  Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3. 

2.  When both Fast Leave feature and Unknown Multicast Discard feature are enabled, the 

leaving of a user connected to a port owning multi-user will result in the other users 
intermitting the multicast business. 

3.  Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled. 

4.  Multicast Filter feature has no effect on static multicast IP. 

5.  Up to 5 IP-Ranges can be bound to one port. 

On this page you can figure the desired IP-ranges to be filtered. 

Choose the menu Multicast→IGMP Snooping→IP-Range to load the following page. 

115