TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트

 

 



1 

Create VLANs 

Create three VLANs with the VLAN ID 3, 4 and 5 respectively, 
and specify the description of VLAN3 as Multicast VLAN on 
VLAN→802.1Q VLAN page.   

2 Configure 

ports 

On 

VLAN→802.1Q VLAN function pages. 

For port 3, configure its link type as GENERAL and its egress rule 
as TAG, and add it to VLAN3, VLAN4 and VLAN5. 
For port 4, configure its link type as GENERAL and its egress rule 
as UNTAG, and add it to VLAN3 and VLAN 4. 
For port 5, configure its link type as GENERAL and its egress rule 
as UNTAG, and add it to VLAN3 and VLAN 5. 

3 Enable 

IGMP 

Snooping function 

Enable IGMP Snooping function globally on Multicast→IGMP 
Snooping→Snooping Config page. Enable IGMP Snooping 
function for port 3, port4 and port 5 on Multicast→IGMP 
Snooping→Port Config page. 

4 Enable  Multicast 

VLAN 

Enable Multicast VLAN, configure the VLAN ID of a multicast 
VLAN as 3 and keep the other parameters as default on 
Multicast→IGMP Snooping→Multicast VLAN page.  

5 

Check Multicast VLAN  3-5  and  Multicast VLAN 3 will be displayed in the IGMP 

Snooping Status table on the Multicast→IGMP 
Snooping→Snooping Config page. 

Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not learned 

119