TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트

 

Configuration Procedure: 

1 

Select the port priority 

Required.  On  QoS→DiffServ→Port Priority page, 
configure the port priority. 

2  Configure the mapping 

relation between the CoS 
priority and TC 

Required. On QoS→DiffServ→802.1P/CoS mapping 
page, configure the mapping relation between the CoS 
and TC. 

3 

Select a schedule mode 

Required.  On  QoS→DiffServ→Schedule Mode 
page, select a schedule mode. 

On this page you can configure DSCP priority. DSCP (DiffServ Code Point) is a new definition to IP 
ToS field given by IEEE. This field is used to divide IP datagram into 64 priorities. When DSCP 
Priority is enabled, IP datagram are mapped to different priority levels based on DSCP priority 
mode; non-IP datagram with 802.1Q tag are mapped to different priority levels based on 802.1P 
priority mode if 8021.1P Priority mode is enabled; the untagged non-IP datagram are mapped based 
on port priority mode. 

Choose the menu QoS →DiffServ →DSCP Priority to load the following page. 

 

Figure 9-7 DSCP Priority 

137