TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트
제품 코드
TL-SG3424
13.2.3 NTDP Config
On this page you can configure NTDP globally.
Choose the menu Cluster→NTDP→NTDP Config to load the following page.
Figure 13-8 NTDP Config
The following entries are displayed on this screen:
Global Config
NTDP:
Select Enable/Disable NTDP for the switch globally.
NTDP Interval Time:
Enter the interval to collect topology information. The default is 1
minute.
minute.
NTDP Hops:
Enter the hop count the switch topology collects. The default is 3
hops.
hops.
NTDP Hop Delay:
Enter the time between the switch receiving NTDP request
packets and the switch forwarding NTDP request packets for the
first time. The default is 200 milliseconds.
packets and the switch forwarding NTDP request packets for the
first time. The default is 200 milliseconds.
NTDP Port Delay:
Enter the time between the port forwarding NTDP request packets
and its adjacent port forwarding NTDP request packets over. The
default is 20 milliseconds.
and its adjacent port forwarding NTDP request packets over. The
default is 20 milliseconds.
Port Config
215