TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트

10

 L2 Lite Managed Switch

Connecting the device to ground is to quickly release the lightning over-voltage and 
over-current of the device, which is also a necessary measure to protect the body from 
electric shock.

In  different  environments,  the  device  may  be  grounded  differently.  The  following 
will instruct you to connect the device to the ground in two ways, connecting to the 
grounding bar or connecting to the ground via the power cord. Please connect the 
device to ground in the optimum way according to your specific operation environment.

■

If the device is installed in the Equipment Room, where a grounding bar is available, 
you are recommended to connect the device to the Grounding Bar as shown in the 
following figure.

Switch (Rear Panel)
Ground Cable

Grounding Terminal
Grounding Bar

Connecting to the Grounding Bar

Figure 3-1  

Note: The grounding bar is not provided with our product. If needed, please self 
purchase it.

■

If the device is installed in the normal environment, the device can be grounded via the 
PE (Protecting Earth1 cable of the AC power supply as shown in the following figure.

Connecting to the Ground

Figure 3-2  

Lightning Protection