Friedland D918 S Wireless Bell 200006 사용자 설명서
제품 코드
200006
2
Libra + 200m Portable chime
Thank you for choosing this Friedland product. Please use the following instructions to
ensure correct installation and use. Keep these notes in a safe place for future reference
ensure correct installation and use. Keep these notes in a safe place for future reference
.
Unpack your chime kit and identify the
following parts:
following parts:
¬
●
Chime
●
Chime bracket
●
2 x fixing screws for chime
●
2 x wall plugs
You will need:
●
A 4mm cross-head screwdriver
●
A 6mm masonry drill
●
4 x LR14 ’C’ Alkaline batteries
Checking pack contents
Before proceeding with the installation,
please note the following safety warnings:
please note the following safety warnings:
¬
●
Always follow the manufacturer’s advice
when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.
protective equipment (e.g. safety goggles)
when drilling holes etc.
¬
●
Before drilling holes in walls, check for
hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.
hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.
Safety
You need to do the following to get started:
●
Fit the chime batteries
●
Check the chime switch setting
●
Check the volume setting
When you operate the bell push, the chime will sound and the 1st Icon will flash. If you have additional
pushes or you want to assign a different icon to your push, you will need to follow the programming procedure.
pushes or you want to assign a different icon to your push, you will need to follow the programming procedure.
Quick start