Casio MEP-U10 488309 데이터 시트
제품 코드
488309
26
To confi gure print settings (Printer, Layout,
Format)
Format)
1.
Display the properties screen (page
2.
Click
the
Model tab.
3.
Confi gure the settings described below.
Use the Offset for Folding setting to specify leading or trailing
margins to suit the location where the label will be used or how it
will be affi xed to something.
Selecting Left or Right will insert a margin that can be used as the
part that is affi xed to a document or other object, with the text part
of the label sticking out or folded upwards so it sticks up.
If you plan to affi x the entire surface of the label to an object, select
None here.
margins to suit the location where the label will be used or how it
will be affi xed to something.
Selecting Left or Right will insert a margin that can be used as the
part that is affi xed to a document or other object, with the text part
of the label sticking out or folded upwards so it sticks up.
If you plan to affi x the entire surface of the label to an object, select
None here.
None
Left
Right
Leading
margin
(left)
margin
(left)
Approximately
10 mm
(Approximately
0.4 in.)
10 mm
(Approximately
0.4 in.)
Approximately
20 mm
(Approximately
0.8 in.)
20 mm
(Approximately
0.8 in.)
Approximately
10 mm
(Approximately
0.4 in.)
10 mm
(Approximately
0.4 in.)
Trailing
margin
(right)
margin
(right)
Approximately
10 mm
(Approximately
0.4 in.)
10 mm
(Approximately
0.4 in.)
Approximately
10 mm
(Approximately
0.4 in.)
10 mm
(Approximately
0.4 in.)
Approximately
20 mm
(Approximately
0.8 in.)
20 mm
(Approximately
0.8 in.)
You should change the Print Density( D ) setting only when you
feel printed text is blurry or too dark (too much density). Normally
you should leave print density at a setting of 3.
The Auto Cut Style( C ) is fi xed and cannot be changed.
feel printed text is blurry or too dark (too much density). Normally
you should leave print density at a setting of 3.
The Auto Cut Style( C ) is fi xed and cannot be changed.
■
•
•
•
•
•
4.
Click
the
Layout tab.
Layout tab
5.
Confi gure settings for each item.
You can change the Tape Length( L ) setting value within a range
of 25 to 300 mm (approximately 1 to 11.8 inches).
The tape length setting should be considered as an approximation
only. The actual length of the printed tape may be shorter due to
environmental conditions where you are printing, or due to printing
contents.
The table below shows the setting values for Tape Width( W ).
of 25 to 300 mm (approximately 1 to 11.8 inches).
The tape length setting should be considered as an approximation
only. The actual length of the printed tape may be shorter due to
environmental conditions where you are printing, or due to printing
contents.
The table below shows the setting values for Tape Width( W ).
Tape width
Maximum printing width
9 mm (approximately 0.3 in.),
12 mm (approximately 0.5 in.),
18 mm (approximately 0.7 in.)
12 mm (approximately 0.5 in.),
18 mm (approximately 0.7 in.)
12 mm (approximately 0.5 in.)
•
•
•