HP 643169-001 C 데이터 시트
제품 코드
C
Link speed and duplex settings
NOTE:
This information applies only to Ethernet networks. It does not apply to wireless networks.
The link speed and communication mode of the print server must match the network hub. For most
situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings
might prevent the product from communicating with other network devices. If you need to make
changes, use the product control panel.
NOTE:
The setting must match with the network product to which you are connecting (a network hub,
switch, gateway, router, or computer).
NOTE:
Making changes to these settings causes the product to turn off and then on. Make changes
only when the product is idle.
Link speed and duplex settings (LCD control panel)
1.
On the control panel, press the
OK
button.
2.
Use the arrow buttons to select the Network Setup option, and then press the
OK
button.
3.
Use the arrow buttons to select the Link Speed option, and then press the
OK
button.
4.
Use the arrow buttons to select one of the following settings.
Setting
Description
Automatic
The print server automatically configures itself for the highest link speed and
communication mode allowed on the network.
communication mode allowed on the network.
10T Full
10 Mbps, full-duplex operation
10T Half
10 megabytes per second (Mbps), half-duplex operation
100TX Full
100 Mbps, full-duplex operation
100TX Half
100 Mbps, half-duplex operation
5.
Press the
OK
button. The product turns off and then on.
Link speed and duplex settings (touchscreen control panel)
1.
On the Home screen, touch the Setup button.
2.
Scroll to and touch the Network Setup menu.
3.
Touch the Link Speed menu.
4.
Select one of the following options.
Setting
Description
Automatic
The print server automatically configures itself for the highest link speed and
communication mode allowed on the network.
communication mode allowed on the network.
ENWW
Configure IP network settings
63