Epson EB-S03 V11H556140 데이터 시트

Submenu

Function

IP Settings

(This item can only be set if Connection Mode is set to
Advanced

.)

You can make network settings.
DHCP

: Set to On to make network settings using DHCP

. If this

is set to On, you cannot set any more addresses.
IP Address

: You can input the IP address

 assigned to the

projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask

: You can input the subnet mask

 for the projector.

You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address

: You can input the IP address for the gateway

for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses

cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)

SSID Display

To prevent the SSID

 from being displayed on the LAN Standby

screen, set this to Off.

IP Address Dis‐
play

To prevent the IP address

 from being displayed on the LAN

Standby screen, set this to Off.

Available  when  the  Wireless  LAN  unit  is  installed.

Submenu

Function

Security

Select the security type from the items that are displayed.
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.

WEP Encryption

You can set the encryption for WEP encryption.
128Bit

: Uses 128 (104) bit encoding.

: Uses 64 (40) bit encoding.

Format

You can set the input method for the WEP encryption key.
ASCII

: Input text.

: Input in HEX (hexadecimal).

Key ID

Selects the WEP encryption ID key.