Funai WD6D-M100 WD6DM100 데이터 시트

36

EN

With EPG system, you can programme DVB channel 
recording much easier. You can only choose one programme 
and enter the selection.
Refer to “EPG (Electronic Programme Guide)” on page 27.

List of DVB programmes will be displayed.

e.g.) Daily Mode

Press [RED] to display “Daily Mode”.
Press [GREEN] to display “Weekly Mode”.

Select a desired programme using 
[K

\ L \ 0 \ 1], then press [ENTER\OK] or 

Set “End”, “REC To”, “Speed” and “STTL” 
using [K

\ L \ 0 \ 1], then press [ENTER\OK].

• EPG timer recording will stop if the broadcaster sends the 

EPG programme end or if you press [STOP C] on the front 
panel or press [STOP C] on the remote control, then select 
“Yes” using [K

\ L], then press [ENTER\OK].

• If “Auto Clock Setting” is “OFF”, “Timer Recording (EPG)” 

may not be able to perform.

• If you select a programme that is broadcasting in progress, 

“Watch” is indicated next to 

. When you press 

\OK], you can watch the selected programme.

• If you select a programme that is not broadcasted yet, 

“Timer” is indicated next to 

. When you press 

\OK], you can set “Timer Recording”.

You can set the unit to start recording whenever it detects the 
video scart control from the external tuner.

[Preparation of the external tuner]
• The external tuner should be equipped with some kind 

of timer function. Using timer function of the tuner, set it 
to be turned on when it comes to the time you want to 
start recording, and off when it comes to the time you 
want to finish recording. (Refer to the tuner’s manual on 
how to set the timer.)

• Make sure to turn off the external tuner when you finish 

setting.

[Preparation of this unit]
• Make sure to select the desired recording speed 

beforehand.

• “Sat” will appear on the front panel display and the unit 

goes into the satellite link standby mode.

To cancel the satellite link function in the satellite link 
standby mode:
Press [TIMER SET] or [SAT.LINK] to turn on the unit.

To cancel the satellite link function while the satellite link 
recording is in progress:
On the front panel
Press [STOP C].

On the remote control
1 Press [STOP C].
2 Select “Yes” using [K

\ L], then press [ENTER\OK].

Scart cable (not supplied)

External tuner
(not supplied)

E9TF0ED_EN.book  Page 36  Wednesday, March 17, 2010  1:32 PM