Esge G350 Gastro 90870 Hand Blender 90870 데이터 시트

38

When you have not used your appliance for a 

fairly long time the drive shaft may get stuck due 

to small foodstuff residues which have hardened 

and are now gumming up the lower shaft bearing.

Place your ESGE-Zauberstab

®

 for about 5 mi-

nutes in a jug with hot water and a mild deter-

gent, then switch it on. In general your ESGE-

Zauberstab

®

 will then work again; if not, just try 

to free the shaft carefully with pliers.

Should the shaft still not rotate, the fault probab-

ly lies elsewhere, and the appliance should be 

sent to our repair service.

If sticky ingredients such as egg, sugar, honey 

are processed, it is best to hold the appliance 

together with the attachment for a minute or two 

in the washing-up water. Water will not harm the 

housing, but the cable outlet must not get wet.

Replace damaged attachments immediately. No liability in case of damaged 

attachments!

If an attachment no longer fits tightly on the 

stub, simply pinch the spring blades of the 

attachment together with a pair of pliers. Remove 

the accessories from time to time from the shaft 

and clean the shaft. Otherwise the lower socket 

may be blocked because of insufficient cleaning.