Tandberg Data RDX QuikStor Internal Drive 320GB SATA 8551-RDX 전단
제품 코드
8551-RDX
After removing the drive and accessories,
carefully place it on a flat work surface, top up.
Remember to always protect your unit and server
from electrostatic damage.
carefully place it on a flat work surface, top up.
Remember to always protect your unit and server
from electrostatic damage.
RDX System Features
Unpacking the Unit
Rear View of the RDX System
Emergency
Eject Hole
Eject Hole
Activity LED
Eject Button/
Power LED
Power LED
1
RDX Cartridge Features
Write Protect
Activity LED
Install the software
supplied on your
RDX Product CD.
supplied on your
RDX Product CD.
Caution: If the RDX software
is not installed under Windows
is not installed under Windows
®
the eject button and right-click
eject method may not work properly.
eject method may not work properly.
Installing the Software
2
Power
SATA
Carefully connect
the SATA cable to
your system’s SATA
controller (built-in
or PCI card).
Attach the power
adapter cable. Check all the cable routing and
cable connections. Replace server cover.
Power ratings: 5vDC/1.8A
the SATA cable to
your system’s SATA
controller (built-in
or PCI card).
Attach the power
adapter cable. Check all the cable routing and
cable connections. Replace server cover.
Power ratings: 5vDC/1.8A
Connecting the Unit
4
Accessories
Packing Foam
Drive in ESD
Packaging
Packaging
Open the server cover. Slide the unit into an
unused drive bay until the bezel is flush with the
front of the server. The Eject/Power LED should
be on the lower right. Secure the unit using the
4 mounting screws provided.
unused drive bay until the bezel is flush with the
front of the server. The Eject/Power LED should
be on the lower right. Secure the unit using the
4 mounting screws provided.
Mounting the Unit
3
Unit
Server
Front
Front
Unit
Server
Front
Front
Mounting the 3.5 inch unit
Mounting the 5.25 inch unit