Ansmann APS 2250 H 5311143 사용자 설명서
제품 코드
5311143
GB
INSTRUCTION MANUAL
DESCRIPTION
This is a universal power supply with an adjustable output voltage to power many
small electrical devices. Included in the set are different output connectors, which can
be connected to the output cable with the desired polarity.
This is a universal power supply with an adjustable output voltage to power many
small electrical devices. Included in the set are different output connectors, which can
be connected to the output cable with the desired polarity.
SAFETY INSTRUCTIONS
> Please read the operating instructions carefully before use!
> Do not use the power supply if there are signs of any damage to the housing,
plug, or cable!
> The power supply is for indoor use only; keep it in a dry environment!
> Disconnect the power supply from mains when not in use, during cleaning and
maintenance!
> Never attempt to open the power supply!
> Keep away from children‘s reach!
> Please read the operating instructions carefully before use!
> Do not use the power supply if there are signs of any damage to the housing,
plug, or cable!
> The power supply is for indoor use only; keep it in a dry environment!
> Disconnect the power supply from mains when not in use, during cleaning and
maintenance!
> Never attempt to open the power supply!
> Keep away from children‘s reach!
IMPORTANT ADJUSTMENTS BEFORE OPERATION
Before you connect the power supply to the equipment to be powered or to the mains,
make sure that the output voltage (V), the output current (mA) and the polarity
correspond to the device you wish to power.
1.) Check current
Make sure that the device you want to connect to, does not consume more current
(mA) than the power supply is able to supply (check the name plate of the power
supply). If the power supply is overloaded, it can be destroyed.
2.) Choose the correct output connector
The enclosed connectors correspond to the most commonly used sizes. The correct
connector should fit properly using a little pressure. Do not use extreme force to insert
the connector as this could damage the unit to be powered.
3.) Set the correct polarity for the equipment to be powered
Check the polarity of the equipment to be powered and set the appropriate polarity
through the polarity inverter [1] at the output cable of the power supply (see figure).
Before you connect the power supply to the equipment to be powered or to the mains,
make sure that the output voltage (V), the output current (mA) and the polarity
correspond to the device you wish to power.
1.) Check current
Make sure that the device you want to connect to, does not consume more current
(mA) than the power supply is able to supply (check the name plate of the power
supply). If the power supply is overloaded, it can be destroyed.
2.) Choose the correct output connector
The enclosed connectors correspond to the most commonly used sizes. The correct
connector should fit properly using a little pressure. Do not use extreme force to insert
the connector as this could damage the unit to be powered.
3.) Set the correct polarity for the equipment to be powered
Check the polarity of the equipment to be powered and set the appropriate polarity
through the polarity inverter [1] at the output cable of the power supply (see figure).